'Changing the Time and Date on Business Telephone Systems'

This year, areas of the US participating in Daylight Saving Time will be changing their clocks on the first Sunday in November because of a new energy bill signed in to law in August of 2005. This change gives us four more weeks of Daylight Saving Time.

Following are instructions for changing the time and/or date on some popular phone systems. See this helpful page for many more.

Inter-Tel Axxess - Networked Systems Only - From the attendant telephone

• While on hook, enter the Set Network Date and Time feature code (9810). Your displays the current date.
• If you do not need to change the date, press "#" or ACCEPT to skip to the time prompt.
• Use the dialpads to enter month day and year mm-dd-yy format.
• If you make a mistake, press "MUTE" to backspace or "*" to start over.
• Use the dialpad buttons to enter the time in hours and minutes "0900" for 9:00.
• If 12-hour display is used, the display shows AM or PM. Press "1" for AM and "2" for PM.

Comdial DX-80

• Press "Feature" "#" "*" and enter your password (default is "########").
• Press "Show" and "0814"
• Press "Save" and then "Show".
• The option to change the year appears. Press "Next" to skip. To change, press "Chg" then enter 2 digits for the year and then "Save" and "Next.
• The option to change the month appears. Press "Next" to skip. To change, press "Chg" then enter 2 digits for the month and then "Save" and "Next.
• The option to change the day appears. Press "Next" to skip. To change, press "Chg" then enter 2 digits for the date and then "Save" and "Next.
• The option to change the weekday appears. Press "Next" to skip. To change, press "Chg" until you see the day you want. Press "Save" and "Next.
• The option to change the hour appears. Press "Next" to skip. To change, press "Chg" then enter 2 digits for the hour in military format and then "Save" and "Next.
• The option to change the minutes appears. Press "Next" to skip. To change, press "Chg" then enter 2 digits for the minutes and then "Save".
• Press the "On/Off" button to exit the programming mode.

Vodavi StarPlus STS and StarPlus-Triad
Also Digital, Mach I, DVX and XTS

The first attendant station may set system time and date.

1. Dial [692].
2. Enter time and date in the following format: YY MM DD HH MM.
   HH= Hour (00-23)

When the correct number of digits are entered, a confirmation tone sounds.

Executone CX 816

• From station 100, take the handset off-hook.
• Dial "*".
• Dial "7764" (PROG).
• Press the "FLASH" button.
• Dial "28".
• Enter time and date as follows: YYMMDDHHMMSS.
• Press the "HOLD" button.

Enter time and date in the following formats-
Year (YY) =00-99
Month (MM) =01-12
Day (DD) =0-31
Hour (HH) =00-24
Minute (MM) =00-60
Second (SS) =00-60

No trackbacks.
Comments

Name:     (required)
Email:    (required, not published)
Comment: